Energy in good hands · across Ukraine
MV & LV networksand renewables.
6–30 kV medium-voltage (MV) cable and overhead lines, MV/LV transformer substations, directional drilling and grid-connection infrastructure for solar and wind farms — for network operators, main contractors and investors across Ukraine.
- 1,724.8 kmof MV and LV cable lines built in 2026 — all jobs
- Partner
distribution system operator
Partners and clients
We work with the companies building energy networks
Services
End to end — from the trench to handover
We carry out medium- and low-voltage power works with our own equipment and our own crews. We can deliver the full scope of a job or a selected part of it as a subcontractor.
MV and LV cable lines
Construction, rebuilding and repair of MV 6–30 kV and LV 0.4 kV cable lines: trenching, drilling, cable laying, joints, terminations, testing and handover.
Learn moreOverhead line undergrounding
Undergrounding of MV and LV overhead lines: new cable line, HDD crossings, ZKSN junctions, switching and removal of the old line, poles included.
Learn moreMV overhead lines 6–30 kV
MV 6–30 kV and LV overhead lines: pole erection and replacement, line rebuilds, tie-ins to cable lines and removal of lines and pole-mounted substations.
Learn moreMV/LV substations
Construction of MV/LV transformer substations, ZKSN and LV cable junctions, replacement of pole-mounted units, MV and LV cable connections and testing.
Learn moreHorizontal directional drilling
Horizontal directional drilling and pipe jacking under roads, railways and rivers — ducts for MV, LV and fibre cables. Own Tracto-Technik GRUNDODRILL rig.
Learn moreFibre-optic ducts
Fibre-optic duct construction: HDPE ducts and microducts, cable chambers, directional drilling under roads and railways. Civil works contractor across Ukraine.
Learn moreUtility conflict relocation
Relocating MV and LV networks that clash with roads, railways and new developments: cable diversions, undergrounding, HDD, DSO outages and acceptance.
Learn moreEquipment supply
Equipment procurement for MV and LV networks: XRUHAKXS and NA2XS(F)2Y cables, joints, terminations, ZK/ZKSN junctions, substations and ducts to DSO specs.
Learn moreSolar farms
Solar farm electrical infrastructure: internal MV cable network, transformer substations, MV switchgear and the line to the DSO grid. Grid connection works.
Learn moreWind farms
Electrical infrastructure for wind farms: MV cable network between turbines, MV junctions and switchgear, lines to the HV/MV substation and DSO grid.
Learn moreAbout us
A young company with an experienced team
BUDNORM has been operating since 2024 and is based in Horenychi, Kyiv Oblast. The company is a well-coordinated team of professionals with many years of experience in the power industry — line fitters, plant operators and site managers who previously built networks for distribution system operators and major contractors.
In our first two years we completed jobs for ENEA Operator, ZILINSKIS and PIWOWARSKI — from a short cable line in Bolewice to a contract worth more than PLN 2.4 million net, in which we led the consortium. Each client confirmed the work with a written reference letter.
- MV cable lines up to 30 kV and 0.4 kV LV networks
- Our own directional drilling rig, excavators and crane-equipped (HDS) truck
- Working as main contractor, consortium leader or subcontractor
In numbers
Backed by references
Projects
Every job backed by the client’s reference
We describe our jobs in detail — scope, cable types, lengths, dates and values — exactly as confirmed in the reference letters.
Swipe
ENEA Operator — MV 20 kV network, Niegosławice
Lubuskie Voivodeship
Toruń — MV 15 kV line undergrounding
Kuyavian-Pomeranian Voivodeship
Konin — RS Maliniec 15 kV switching station
Greater Poland Voivodeship
MV/LV network rebuild — 8 villages
Greater Poland / Lubuskie Voivodeships
Bolewice — MV 15 kV cable line
Greater Poland Voivodeship
„Wyżej wymienione roboty realizowane przez firmę BUDNORM zostały wykonane należycie, zgodnie ze sztuką budowlaną, w uzgodnionych terminach i bez usterek.
(“The above works carried out by BUDNORM were performed properly, in line with good construction practice, on the agreed dates and without defects.”)”
Our projects on the map
We work throughout Ukraine. From our office in Horenychi, Kyiv Oblast, we travel with our own equipment wherever the job is; our completed projects are in Poland.
- 1ENEA Operator — MV 20 kV network, NiegosławiceENEA Operator · PLN 2,405,200
- 2Toruń — MV 15 kV line undergroundingZILINSKIS · PLN 682,000
- 3Konin — RS Maliniec 15 kV switching stationZILINSKIS · PLN 642,000
- 4MV/LV network rebuild — 8 villagesPIWOWARSKI · PLN 486,120
- 5Bolewice — MV 15 kV cable linePIWOWARSKI · PLN 208,800
How we work
From enquiry to handover
Swipe
- 01
Review and pricing
We review the design, bill of quantities and site conditions. Within a few working days we prepare a quotation with a schedule.
- 02
Site preparation
Agreements with landowners and road authorities, traffic management, notifications, route setting-out and material deliveries.
- 03
Construction
Trenching and drilling, cable laying, installation of joints, terminations, junction cabinets and substations, removal of old networks — all by our own crews.
- 04
Testing and handover
Tests and measurements, as-built documentation and survey, handover of the network for operation.
Why BUDNORM
What the client gets
Swipe
Our own plant
A Tracto GRUNDODRILL drilling rig, CAT excavators, a Tesmec puller and a Volvo truck with an HDS crane for cable drums — no waiting for hired equipment.
Operator standards
We know the requirements of distribution system operators (DSOs) for technology, materials and handover documentation — we have worked for ENEA Operator.
Flexible contracting
Main contractor, consortium leader or subcontractor for a selected scope — we adapt to the structure of the job.
On time
All our references confirm that the works were completed on the agreed dates and without defects.
Safety at work
Working live or near energised networks demands discipline — we plan outages and safety measures together with the operator.
Nationwide
We work across Ukraine; our completed jobs are in Poland (Lubuskie, Wielkopolskie and Kujawsko-Pomorskie provinces). Our office is in Horenychi, Kyiv Oblast.
Photos
From our sites
Swipe
Questions
Questions clients ask most often
Do you work as a subcontractor to main contractors?
Yes. Most of our jobs so far have been for contractors working on behalf of network operators (ZILINSKIS, PIWOWARSKI). We can take on the entire power-engineering scope or selected works, e.g. directional drilling only or cable laying.
Can you bid in operators’ tenders?
Yes. For ENEA Operator we were the consortium leader on a contract worth PLN 2,405,200 net covering the construction of transformer substations, MV and LV cable lines and the removal of 8.3 km of overhead line.
Where do you operate?
Throughout Ukraine. Our office is in Horenychi, Kyiv Oblast; our completed projects are in Poland (Lubuskie, Wielkopolskie and Kujawsko-Pomorskie provinces). We move our equipment with our own transport.
How quickly can you prepare a quotation?
Usually within a few working days of receiving the design or bill of quantities. For larger jobs we arrange a site visit and agree a deadline for the quotation.
Do you build grid connections for solar and wind farms?
Yes. We build MV cable lines, cable ducting and connection infrastructure for solar (PV) and wind farms — from the farm’s internal network to the connection to the operator’s grid.
Where can I see your references?
We publish all five reference letters in full on the References page — you can view them and download them as PDFs.
Have a job to price?
Send us the design or a description of the scope and we will prepare a quotation with a schedule. Or simply give us a call.